Verifying The Model And Panel Information; Reconnecting All Cables - Sony KDL-40NX710 Service Manual

2-2-6. VERIFYING THE MODEL AND PANEL INFORMATION

After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
3. Display the DIGITAL Service Menu.
NOTE: There are 4 Service Menus for these models,
DIGITAL, CHASSIS, SUB, and PEM. If the DIGITAL Service
Menu is not displayed, press JUMP or OPTIONS on the
Remote Commander.
DIGITAL
001 OP
000 VERS
<MAIN>
DM1.301J00AA
M2.105C
DD1.016J00AA
(DM1. 3 01J00AA)
WP00.521J00AA
Model ID ID 86d731b1
PID0cb20000
WF:2.0.0.99
Product ID
WF:0B
Camera FW
Camera FW
KDL-40NX710/40NX711/46NX710/46NX711
5 + POWER
Volume
SERVICE
---
<SUB>
SM1.010W00AA
SB1.000W00AA
SD1.010W00AA
RF01.05
ID1C117081
xxxxxxxxxxxxxx
<BEM>
BM1.012W00LU
BB1.000W00LU
BD1.011J46LUX
---.---------
SERVICE ADJUSTMENTS
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name
KDL-40NX710
KDL-40NX710
KDL-40NX711
KDL-46NX710
KDL-46NX710
KDL-46NX711
5. Exit Service Mode by pressing HOME or turn the
TV power off.
6. Proceed to "Reconnecting All Cables".

2-2-7. RECONNECTING ALL CABLES

After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
Model ID Product ID
86d731b1 0cb20000
86d731b1 40b20000
86d731b1 0cb20000
86d731b2 0cb20000
86d731b2 40b20000
86d731b2 0cb20000
30