G9A/G9B (Power) Boards, Buht Board, Hlt Board And Wireless Lan Card Removal - Sony KDL-40NX710 Service Manual

1-3. G9A/G9B (POWER) BOARDS, BUHT BOARD, HLT BOARD AND
WIRELESS LAN CARD REMOVAL
CAUTION: Refer to "Special Handling Instructions When Replacing the LCD Panel Assembly" on page 6.
Note: The Tape PWB (H), Side Jack Label, Terminal Label,
Insulation Sheet (G) and Attachment GL pieces are not included
with the LCD Panel Assembly and must be replaced
when replacing the LCD Panel Assembly.
A Remove 2 screws from Wireless
LAN Card to detach from LCD
Panel Assembly
B Gently peel-off HLT Board
and Disconnect 1 connector
to detach from LCD Panel
Assembly
C Gently peel-off Tape PWB (H) to
detach from HLT Board
D Remove 9 screws from BUHT
Board to detach from LCD Panel
Assembly
E Release 2 clips to detach Side
Jack Bracket from BUHT Board
F Release 2 clips to detach
Terminal Bracket from BUHT
Board
G Remove 3 screws from G9B
(Power) Board to detach from
LCD Panel Assembly
H Gently peel-off Insulation Sheet
(G) to detach from LCD Panel
Assembly
I
Slide-out 2 Attachment GL
pieces to detach from LCD Panel
Assembly
KDL-40NX710/40NX711/46NX710/46NX711
DISASSEMBLY/PART NUMBER INFORMATION
THE TERMINAL LABEL
IS NOT INCLUDED
THE SIDE JACK LABEL
WITH THE REPLACEMENT PANEL.
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
A
B
C
D
I
E
H
F
G
NOTE: Les composants identifies per un trame et
NOTE: The components identified by shading
une marque ! sont critiques pour la securite.
and mark are critical for safety. Replace only
!
Ne les remplacer que par une piece portant le
with part number specified.
numero specifie.
(Check the Sony Electronics Service Information
111
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
101 NA T-MOD (LCD PANEL ASSEMBLY)
FOR ALL T-MOD (LCD PANEL ASSEMBLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
102 4-199-303-01 LABEL, TERMINAL (FOR CND/MX/LAA)
(KDL-40NX710/46NX710 ONLY)
102 4-199-302-01 LABEL, TERMINAL (FOR US)
(KDL-40NX711/46NX711 ONLY)
103 4-199-284-01 LABEL, SIDE JACK (S)
(KDL-40NX710/40NX711 ONLY)
103 4-199-290-01 LABEL, SIDE JACK (L)
(KDL-46NX710/46NX711 ONLY)
104 1-487-819-11 CARD, WIRELESS LAN
105 A-1782-538-A HLT(STD) BOARD, MOUNTED
106 4-195-059-01 TAPE, PWB (H)
NOTE: The components identified by a red outline and a
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
website for any additional service related issues for this model.)
102
103
101
104
105
106
107
108
109
110
REF. NO. PART NO. DESCRIPTION
107 A-1788-127-A BUHT BOARD, COMPLETE
NOTE: For BUHT Board replacement, please refer to section
2-2. Adjustments after Replacing the BUHT Board or LCD Panel Assembly.
NOTE: Final software is not installed on this BUHT Board.
Install the update after replacing this board using the instructions
provided with the software.
108 4-188-665-11 BRACKET, SIDE JACK
109 4-188-666-11 BRACKET, TERMINAL
110 1-474-256-11 G9A (POWER) BOARD, COMPLETE
(KDL-40NX710/40NX711 ONLY)
110 1-474-257-11 G9B (POWER) BOARD, COMPLETE
(KDL-46NX710/46NX711 ONLY)
111 4-188-690-01 SHEET, INSULATION (G)
2-990-421-41 SCREW (+PSW) (M3X6)
mark contain
[ASSEMBLY INCLUDES]
16