Rc Operation Prohibit; Outdoor Unit Status; Temperature Unit Selection - Hitachi airCloud HC-IOTGW Installation & Maintenance Manual

5.11 RC Operation Prohibit

The "RC operation prohibit" area is below the "Control" area. From the "RC operation prohibit"
area, set the function of remote controller.
Click "Set" will make new setting effective immediately.
● If other central controller and the following is connected to the system, "RC operation
prohibit" function cannot be used.
● In this case, none of the central controller shall set "RC operation prohibit" function. Setting
"RC operation prohibit" in such scenario may cause malfunction.
● On wall type (if RC is connected, RC operation prohibit function will be available.)

5.12 Outdoor Unit Status

Click outdoor name item in the device list page, check the status of outdoor unit.

5.13 Temperature Unit Selection

In the page of indoor status and outdoor status, change the temperature unit between Celsius
(˚C) and Fahrenheit (˚F)
Figure 5.14 Remote Controller Disable
Figure 5.15 Outdoor Unit Status
Figure 5.16 Temperature Unit
26