Advertisement
TECHNICAL BULLETIN
FA-A-0326-C
Setting the live view window
The following shows the procedure for setting the live view window. Set it with a personal computer and network camera
connected after setting an IP address.
Operating procedure
1.
Enter the IP address of a network camera on a web browser.
2.
Enter the set user name and password to log in to the network camera.
The live view window is displayed.
3.
Adjust the installation position of the network camera by checking the image.
Setting an ONVIF user
The following shows the procedure for setting an ONVIF user. Set it with a personal computer and network camera connected
after setting an IP address.
Operating procedure
1.
Enter the IP address of a network camera on a web browser.
2.
Enter the set user name and password to log in to the network camera.
3.
Select [Settings] [System] [ONVIF].
4.
Click "+" below "ONVIF users," and add an ONVIF user.
Set a user name and password.
Select "Administrator" for the user group.
The user name and password set for "ONVIF users" are used for "Camera Individual Settings" in the module
extended parameter of a camera recorder module.
[
6 / 9
]
Advertisement
