Table of Contents
Advertisement
pair remote
Remote Pairing
The original remote that comes in the box is already paired to the adjustable base . No further action is required . In the event that
the remote is not paired with the base, follow the steps below .
STEP 1
Unplug the Power Cord from your power outlet . Wait 1
minute, then plug it back in to your power outlet . Perform
Step 2 within 10 seconds, while the control box light is
flashing .
Power Supply
STEP 2
Press and hold the PAIR button on the
back of the remote . The PAIR button
will illuminate and start to flash . When
the PAIR button stops flashing, the
LED light on the control box will stop
flashing . Release the PAIR button .
Power Cord
STEP 3
The remote is now paired to the adjustable base . Test all
remote functions . If the remote buttons do not impact the
adjustable base movements, please repeat the process again .
*Ensure that the remote is not in Child Lock Mode .
See pg. 13 for Child Lock Deactivation instructions.
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Motion Air and is the answer not in the manual?
Questions and answers
power adapter blinking control box not luminated
The control box is not illuminated because there may be an issue with the power connection. The power adapter blinking could indicate a power problem. To resolve this, check that the input and power cords are properly connected. Try plugging the bed base into a different electrical outlet or test the current outlet with another working appliance. Using a grounded electrical surge protector is recommended. If the issue persists, unplug the base for one hour to reset the electronic components.
This answer is automatically generated