Page 1
PluginAllBulk file (NOSEBLEE.w2b): Load this file through the FILE Type that matches your PLG150-DX board. That is, PluginAllBulk1 if your PLG150-DX is in slot 1, PluginAllBulk2 if your PLG150-DX is in slot 2 and so on. These are PLG150-DX BOARD Voices for Board bank 035/000 DX SIMULATOR file (DX_NOSE.dxc): Open with the DX Simulator program.
Page 2
PLG150-DX Custom User Voice data Selecting a waveform on an analog synth would The DX synth engine is based on FM or Frequency get you in the ballpark. And from the rough Modulation (yes, the same FM that is used for descriptions I have given you here you could build radio –...
Page 3
There is an sawtooth waveform, 1:1. If you increase the ratio excellent tutorial on-line at the Yamaha Digital of the modulator frequency so that it is 2:1 tuning Music World site – with a number of lessons...
Page 4
16 note polyphony on the sound. For those of you wanting more polyphony for the FM The LOAD: sounds, you can add a second or third PLG150-DX As is the way with the Yamaha synth engine plug- board to your host and activate the POLY EXPAND in boards you have two files.
Page 5
FM – as one early reviewer of velocity curve of the PLG150-DX to mimic the the DX7 said… it is very easy to make bell sounds original DX7. To do this navigate to the PLUG-IN with FM…well yes, any relationship other than...
Page 6
27. Sc: Elec Pulse The DX SIMULATOR allows you to edit the User 28. Cp: Dredzs Unison Mono bank of the PLG150-DX Board. The DX Board has 29. Me: Elec Rez Mono many preset banks and one User bank (035/000).