MikroTik wAP LTE kit User Manual

7/30/2021
Pages / User Manuals / LTE products
wAP kit-series
This manual is for wAP kit series models:
wAP LTE kit
wAP LTE kit US
wAP 4G kit
This device needs to be upgraded to RouterOS v6.44.6 or the latest version to ensure compliance with local authority regulations.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic

Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
Note. The information contained here is subject to change. Please visit the product page on

Quickstart

Use a Phillips head screwdriver to loosen the screw, which secures the bottom lid (see
Insert the SIM card.
Choose your powering solution, please see the
Connect the Ethernet cable to the PoE and connect the other end of the Ethernet cable to this MikroTik router. Plug the provided power supply into the PoE injector.
Wireless AP mode is enabled by default, you can connect from your computer to the SSID that begins with "MikroTik". The configuration interface is available via a web
browser. The address is https://192.168.88.1
Connect to the wireless network, open
User name: admin and there is no password by default you will be logged in automatically to the Quick Set screen.
Click the "Check for updates" button on the right side and updating your RouterOS software to the latest version to ensure the best performance and stability. Must have a valid
SIM card inserted.
To personalize your wireless network, SSID can be changed in the fields "Network Name";
Choose your country on the left side of the screen in the field "Country", to apply country regulation settings.
Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols.
Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next time.
Click on the "Apply Configuration" to save changes.
To manually update the device if no Internet connection is available.
Download the latest RouterOS software from https://mikrotik.com/download.
Choose MIPSBE packages, and save them to your PC.
Connect again and in Files menu upload downloaded packages.
Restart the device.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
1. Scan QR code and choose your preferred OS.
2. Install and open application.
3. By default, the IP address and user name will be already entered.
4. Click Connect to establish a connection to your device through a wireless network.
5. Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.
6. An advanced menu is available to fully configure all necessary settings.
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents.
Read the installation instructions before connecting the system to the power source.
https://help.mikrotik.com/docs/display/UM/wAP+kit-series
wAP kit-series - User manuals - MikroTik Documentation
Powering section for possibilities.
.
https://192.168.88.1 in your web browser to start the configuration.
www.mikrotik.com for the most up to date version of this document.
Bottom Lid).
1/7