Santa Fe ULTRA98 Quick Start Instructions page 3

8
OUTPUT TO DRAIN.
A. ATTACH A P-TRAP (AVAILABLE AT MOST HARDWARE STORES).
B. IF YOU NEED WATER TO TRAVEL A FURTHER DISTANCE, SEE SECTION 12 BELOW ON HOW TO ORDER A PUMP KIT.
C. SEE MANUAL FOR MORE DETAILS. MANUAL CAN BE FOUND AT SANTA-FE-PRODUCTS.COM.
9
VERIFY WALL OUTLET IS CORRECT VOLTAGE AND AMPERAGE.
DOES REQUIRE A DEDICATED 120V 15 AMP CIRCUIT.
10
PLUG IN UNIT.
EXTERNAL CONTROLS ARE REQUIRED, SEE SECTION 12 BELOW ON HOW TO ORDER.
98
ULTRA SERIES DEHUMIDIFIER
NC
VENT
DMPR
COMP
DAMPER
11
ACCESSORIES
FOR ADDITIONAL PRODUCT INFORMATION OR TO PURCHASE ADDITIONAL ACCESSORIES FOR YOUR SYSTEM, VISIT
SANTA-FE-PRODUCTS.COM
A. REPLACEMENT FILTER: Change the filter every 3 to 6 months or when the filter is visibly dirty.
PN 4037722 MERV-13 Filter
PN 4037731 MERV-13 Filter, 4-Pack
PN 4037732 MERV-13 Filter, 12-Pack
B. HANG KIT: Recommended for hanging the dehumidifier overhead.
PN 4036695 Hang Kit
C. PUMP KIT: Allows for draining and transferring water when the unit is not hard plumbed or near a drain.
PN 4022220 Condensate Pump
STOP
DO NOT RETURN TO RETAILER. FOR SERVICE OR TROUBLESHOOTING USE THE CONTACT INFORMATION BELOW.
N E ED HELP? C ALL US AT (800) 533.7533 OR VIS IT US AT SANTA-FE-P RODUCTS.COM
YELLOW WIRE
MUST BE
BROKEN TO
INSTALL FLOAT
SWITCH
NC
FLOAT
SWITCH
DEH-3000
NC
VENT
FAN
DAMPER
120
ULTRA SERIES DEHUMIDIFIER
JUMPER MUST
BE REMOVED
IF USING
FLOAT SWITCH
NC
FLOAT
SWITCH
DEH-3000
DMPR FAN
COMP
98 120
ULTRA SERIES DEHUMIDIFIER
BREAK WIRE
TO INSTALL
FLOAT SWITCH
NC
FLOAT
SWITCH
2 Wire Control