Streetwize SWRB5 Instructions For Use

SWRB5
Heavy Duty Anti-Theft
Aluminium
Universal
Roof Bars
Instructions For Use
These roof bars support a maximum load of 75kg and
come with an anti-theft locking mechanism for a secure
fit and prevent the roof bars from being stolen.
Before installing the roof bars, we highly advise that you
follow the instructions and health & safety guidance
written in this manual to ensure the best practices are
followed when installing and using these bars.
Designed For Use With Factory-Fitted Raised Roof Rails
Max Load Weight: 75 Kg
Roof Bar Installation Instructions
Attention: For health & safety and to prevent damage to vehicle's roof, we highly advise
that two people are involved in fitting and removing these roof bars.
1. On removing the roof bars from its packaging, use the provided
security keys to unlock the mounting bracket on both of the roof bars.
When unlocking, you will notice the red guard moving to give you
access to the Allan key hole.
2. When using the Allan key, the gripping arms on the roof bars will
loosen, allowing you to position the bars on your vehicle's roof rails.
3. Mount the roof bars to your vehicle's roof rails, and use the Allan
key to securely tighten the mounting bracket onto the roof bars.
READ THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND INSTALLATION
Product List
2 x Streetwize Heavy Duty Aluminium Universal Roof Bars
1 x Allan Key
2 x security keys
PLEASE NOTE: When installing the roof bars, please ensure
the mounting bracket is securely connected to the roof rails, as
shown below (A). If roof bars are incorrectly mounted (as shown
in B & C, this will risk destabilising the load, causing danger to
other road users).
A. B.
4. When positioning both roof bars on your vehicle's roof bars,
please ensure that there is a minimum distance of 700mm (27.5")
between the roof bars.
5. Once both roof bars have
been mounted and correctly
positioned, secure them with the
security keys to cover the Allan
key access with the red guard.
C.