Toshiba ST-B10 Series Maintenance Manual page 34

Hide thumbs Also See for ST-B10 Series:
Table of Contents

Advertisement

4. BIOS SETUP
Menu 1st line
Advanced Chipset
Features
Advanced
Menu
Integrated Peripherals
Menu 2nd line
• Video RAM Cacheable
• Init Display First
DRAM Clock/Drive Control
AGP & P2P Bridge Control
CPU & PCI Bus Control
VIA OnChip PCI Device
Super IO Device
USB Device Setting
4- 3
4.2 Basic Operation and Keys Used
Menu 3rd line
• Current FSB Frequency
• Current DRAM Frequency
• DRAM Clock
• DRAM Timing
• SDRAM CAS Latency
• Bank Interleave
• Precharge to Active(Trp)
• Active to Precharge(Tras)
• Active to CMD (Trcd)
• REF to ACT/REF (Trfc)
• ACT(0) to ACT(1) (TRRD)
• Read to Precharge (Trtp)
• Write to Read CMD (Twtr)
• Write Recovery Time (Twr)
• DRAM Command Rate
• RDSAIT code
• RDSAIT selection
• AGP Aperture Size
• AGP 3.0 Mode
• AGP Driving Control
• AGP Driving Value
• AGP Fast Write
• AGP Master 1 WS Write
• AGP Master 1 WS Read
• AGP 3.0 Calibration Cycle
• VGA Share Memory Size
• Direct Frame Buffer
• Select Display Device
• Output Port
• Dithering
• PCI Master 0 WS Write
• PCI Delay Transaction
• Vlink mode selection
• Vlink 8X Support
• DRDY Timing
• Azalia HAD Controller
• LAN Controller
• LanBoot ROM
• Onboard Serial Port 1
• Onboard Serial Port 2
• Onboard Serial Port 3
• Onboard Serial Port 4
• Onboard Serial Port 5
• Onboard Serial Port 6
• USB 1.0 Controller
• USB 2.0 Controller
• USB Operation Mode
• USB Keyboard Function
• USB Mouse Function
EO18-12017
Menu 4th line

Advertisement

Table of Contents
loading

Table of Contents