Related Manuals for Nokia RM-12
Summary of Contents for Nokia RM-12
- Page 1 Customer Care Solutions Technical Documentation 5-Disassembly Instructions Issue 1 11/2004COMPANY CONFIDENTIAL1 Copyright © 2004 Nokia. All Rights Reserved.
- Page 2 RM-12 Table of Contents SW-Update ........................3 Flash Concept – (Point of Sales) ................. 3 Disassembly instructions ....................4 COMPANY CONFIDENTIAL Issue 1 11/2004 Copyright © 2004 Nokia. All Rights Reserved.
- Page 3 SW-Update To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on Nokia Partner Web Site / Nokia Online. Flash Concept – (Point of Sales) It is very important to follow this insertion and removal procedure, otherwise the contact pins of Flash Adapter will be damaged.
- Page 4 RM-12 Disassembly instructions CCS Technical Documentation Disassembly instructions Note! Also see the video clips on care point. 1) Needed tools for disassembly/assembly. 2) Remove the Stylus. 3) Unlock and lift the B-Cover Assy. 4) Push the B-Cover Assy in shown direction.
- Page 5 RM-12 CCS Technical Documentation Disassembly instructions 9) Unlock the Domesheet Sidekey on both sides carefully. 10) Prevent damaging the IHF Frontvolume Gasket when releasing the second sidekey clip. 11) Lift up the Domesheet Sidekey with the dental tool, 12) Unscrew and remove the screws in the shown order, assembly use the reverse order, always use new screws beginning from the left side.
- Page 6 RM-12 Disassembly instructions CCS Technical Documentation 17)Turn over the B-Frame Assy carefully first. 18) Then remove the B-Frame assy. 19) Unlock and pull out the Power Key. 20) Remove the Microphone with tweezers. 21) Remove the Vibra Motor. 22) Use the DC plug to remove the DC Jack. Additional force may be required.
- Page 7 RM-12 CCS Technical Documentation Disassembly instructions For assembly only! 26) Remove the IHF Frontvolume Gasket. For Assembly lift up the IHF Backvolume first , then place the Sidekey Assy. 27) Push out and take away the IHF Speaker. 28) Disconnect the 3 Flex connectors with the SS-34.
- Page 8 RM-12 Disassembly instructions CCS Technical Documentation 33) Remove the Earpiece Adapter Assy, use the SRT-6 if 34) Open the Flex connector of the Camera Module with necessary. the SS-34. 36) Push out the Camera Module with the SRT-6. 35) Use the Shield Assy as support while removing the Camera Module.