Replacing A Front Turn Signal Light Bulb; Replacing A Rear Turn Signal Light Bulb - Yamaha Aerox GDR155 Owner's Manual

Replacing a front turn signal
light bulb
1. Place the vehicle on the center-
stand.
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
Periodic maintenance and adjustment
EAU43054
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
1
the bulb) by turning it clockwise.
Replacing a rear turn signal
light bulb
1
1. Screw
1. Turn signal light bulb
10-31
1. Remove the rear turn signal lens
by removing the screw.
1
2. Remove the burnt-out bulb by
pulling it out.
1
EAUU1121
10