Phoenix Setup - Nokia RH-66 Troubleshooting Manual

Nokia Customer Care

Phoenix Setup

Use the following steps to configure Phoenix for RF troubleshooting.
1. Connect RF test connector to a call box.
2. Connect the mobile terminal to a PC via the bottom connector, and connect a
power supply.
3. Open the Troubleshooting menu, and click Phone Control.
The Phone Control dialog box appears.
4. On the Phone Control dialog box, click the LOCAL button in the Phone State
area to put the mobile terminal into Local Mode.
5. Use Table
configuration based on the band type.
Issue 1 03/2005
Figure 3: Phone Control dialog box
1, "Phoenix Configuration," on
©2005 Nokia Corporation
2115i/2116/2116i (RH-66)
RF Description and Troubleshooting
page 6 to continue Phoenix
Company Confidential Page 5