Viewing Networks - Nokia T-Mobile Operator's Manual

ChapterTitleVariable

9.7 Viewing networks

Procedure 21
80
You can view the network parameters, add an Access Point (AP), or configure the
Auto Configuration Server (ACS) from the Network web GUI menu option:
•
Wi-Fi Networks (Procedure 21)
•
Access Point (Procedure 22)
•
Auto Configuration Server (ACS) - (Procedure 23)
You will need to know the IP address of the T-Mobile
Note —
High-Speed Internet Gateway along with the user name and
password to perform these procedures. This information is
located on the label located on the bottom of the gateway.
Wi-Fi 2.4GHz and 5GHz Wi-Fi networks settings
Use this procedure to configure the Wi-Fi 2.4GHz General Settings parameters for the T-Mobile
High-Speed Internet Gateway.
1 If you have not done so yet, complete the steps in procedure 10.
The Overview Dashboard screen appears with the web GUI menu.
2 If you have not already logged in, log into the web GUI by completing the steps in
procedure12.
3 Click Network.
Wi-Fi Networks, Access Point, and Auto Configuration Server (ACS) appear in the web GUI
menu.
4 Click the arrow beside Wi-Fi Networks.
2.4 GHz and 5GHz appear in the web GUI menu.
5 Click the down arrow beside Wi-Fi Networks.
The 2.4 GHz and 5GHz options appear in the web GUI menu.
Nokia 3TG-01275-AAAA-TCZZA
T-Mobile High-Speed Internet Gateway Operator
Manual
Issue: DRAFT