Configuration; Getting Started - Nokia T-Mobile Operator's Manual

T-Mobile High-Speed Internet Gateway Operator
Manual

9 Configuration

9.1 Getting started

Issue: DRAFT
9.1 Getting started
9.2 Prerequisite for all procedures
9.3 Viewing the Overview screen
9.4 Logging In to the Web GUI
9.5 Viewing status information
9.6 Viewing statistics
9.7 Viewing networks
9.8 Configuring system parameters
9.9 Changing the web GUI language
You can configure the T-Mobile High-Speed Internet Gateway using a web-based
GUI (Web GUI) available on a PC, laptop, smart phone, or tablet. These devices
must have an Ethernet LAN connection or a Wi-Fi or Mesh Wi-Fi 6 System to the
T-Mobile High-Speed Internet Gateway. The web GUI can also be used through a
smart phone that has access to the T-Mobile High-Speed Internet Gateway.
Refer to the T-Mobile High-Speed Internet Gateway
Note —
Customer Release Notes before configuring the T-Mobile
High-Speed Internet Gateway.
Use the T-Mobile High-Speed Internet Gateway web GUI to view and configure the
tasks listed in Table 7.
Note 1 —
viewed without logging in or entering any credentials. To view
these parameters, enter the IP address located on the label on
the bottom of the gateway.
Note 2 —
Admin user are described in the T-Mobile High-Speed Internet
Gateway User Guide.
Table lists the procedures the login requirements for the procedures described in this
chapter.
Nokia 3TG-01275-AAAA-TCZZA
Overview, Status, and Statistics parameters can be
The tasks that can only be performed by the Normal
ChapterTitleVariable
69