NPM-2NX
Car Kit
Power is supplied from the vehicle's battery via the power cable PCH–4J. The handsfree
unit provides the power supply to the phone via the system connector.
The HF microphone HFM–8, connects to the
nects to the socket.
Product Code
Handsfree Unit HFU-20694049
Mounting Plate MKU–1
MKU–1 is a fixed-position mounting plate.
Product Code
Mounting plate MKU–10620036
Swivel Mount HHS–9
HHS–9 is a swivel mount that allows for adjustable fixing. It is an alternative to the
MKU-1 method of locating the phone holder, the handsfree unit, or the handset. The two
mounting plates are interchangeable.
Product Code
Swivel mounting plate HHS–90620037
Handsfree Microphone HFM–8
The HF microphone connects directly to the handsfree unit (
into the
socket and twist 90
MIC
Product Code
Handsfree microphone HFM-80690016
Handsfree Speaker HFS–12
The HF speaker connects directly to the handsfree unit ( socket). Insert the plug into the
socket and twist 90
Product Code
Handsfree speaker HFS-120692008
Power Cable PCH–4J
The power cable connects the standard handsfree unit HFU–2 to the vehicle's power sup-
ply. The red wire must be connected to the + voltage on the vehicle's power supply via
the supplied fused connector. The black wire must be attached to a good negative GND
connection.
The blue ignition sense (IGNS) wire is connected to +12 V voltage controlled by the vehi-
cle's ignition key via the supplied fused connector. See Ignition Sense section.
Page 6
o
to lock firmly in place.
o
to lock firmly in place.
ãNokia Corporation
CCS Technical Documentation
socket. And the HF speaker HFS–12, con-
MIC
socket). Insert the plug
MIC
Issue 1 07/02