LIGHT BULB REPLACEMENT
The wattage rating of each bulb is
shown in the following chart.
When replacing a burned-out
bulb, always use the same watt-
age rating according to the follow-
ing chart.
NOTICE
Failure to use a light bulb with
the correct wattage rating can
overload the electrical system
of your motorcycle or cause
the bulb to burn out sooner.
Use only the light bulbs shown
in the chart as replacement
bulbs.
Headlight
Turn signal light
Position light
License plate light
12V 55W (H7)
... Low beam
12V 65W (H9)
... High beam
12V 21W × 4
12V 5W × 2
12V 5W
HEADLIGHT
To replace the headlight bulbs,
perform the following steps:
Low Beam Bulb
1. Remove the bolt 1. Unhook
the hooks 2 to lift the instru-
ment panel.
7-49
Need help?
Do you have a question about the GSX-R600 and is the answer not in the manual?
Questions and answers
Adjusting clutch on 07 gixxer600