Advertisement
3. Place the finger that you enrolled on the biometric sensor with the center
of the pad of your fingertip on the center of the biometric sensor.
4. If verification is successful, you will see the screen-sync progress bar
on the B-Unit 5 Display. Hold the B-Unit 5 up to the flashing area on
the screen, lining up the Screen-Sync Sensor with the on-screen graphic.
If the B-Unit 5 display shows "Move closer to the monitor," you may need to
move the B-Unit 5 closer to the monitor or make sure the B-Unit 5 is aligned
with the B-Unit 5 on-screen graphic. The B-Unit 5 progress bar indicates that
data is being received.
5. When screen-sync completes, a four-character code appears
on the B-Unit 5 display.
6. In the Bloomberg Terminal application, enter the four-character code
into the "B-Unit Code" text field and press <GO> to log into your account.
Retrieving a token code
When accessing some Bloomberg services you may be asked to provide
a token code.
1. Turn on your B-Unit 5 by pressing the power button. The display shows
"Bloomberg" then "Place finger to verify."
7
Advertisement
