Advertisement
8. You will be directed to a flashing screen.
Note: The screen will continue to flash until you have completed the enrollment process.
9. Hold the B-Unit 5 up to the flashing area on the screen, lining up the B-Unit 5
Screen-Sync Sensor with the on-screen graphic. If the B-Unit 5 displays shows
"Move closer to the monitor," you may need to move the B-Unit 5 closer to the
monitor or make sure the B-Unit 5 is aligned to the B-Unit on-screen graphic.
The B-Unit 5 display will show a progress bar indicating that data is being received.
10. When ready, the B-Unit 5 will display "Place Finger to Enroll." Select a finger
to use with the B-Unit 5. Place your finger on the biometric sensor with the
center of the pad of your fingertip on the center of the biometric sensor.
11. When prompted, lift and place your finger.
Note: Each time you are prompted to remove and replace your finger you should adjust
your finger placement slightly from the first position, enabling the sensor to scan an area
of your finger that overlaps what was already scanned and an area it has not yet scanned.
5
Advertisement
