Assembly And Set-Up - Razor T25 Owner's Manual

ASSEMBLY AND SET-UP

Attaching the Handlebars
Required Tool: 3 mm Allen Wrench (included)
1
Pull and hold the pin out, then
press down the folding tab, and
finally raise the T-bar to unfold.
Unfolding the Scooter for First Time Use
1
Pull and hold the pin out, then press down the folding
tab, and finally raise the T-bar to unfold.
2
Plug in connector. Slide the stem
onto the front fork. Be careful not to
pinch wire.
2
Lift T-bar until audible locking sound is heard. Pin and
tab should return to their original position.
3
Tighten the four (4) handlebar
screws securely with a 3 mm Allen
wrench (screws and tool included in
plastic bag).
4 4
WARNING: Keep fingers
clear of the pivoting mechanism
when folding or unfolding the
scooter. Make sure others are
standing clear.