Biostar M7NCG400 User Manual
Biostar M7NCG400 User Manual

Biostar M7NCG400 User Manual

Biostar m7ncg400 motherboard: user guide
Hide thumbs Also See for M7NCG400:
Table of Contents

Advertisement

Available languages

Available languages

M
7
N
C
G
4
0
0
M
7
N
C
G
4
0
0
M
7
N
C
G
4
0
0
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are
designed
to
provide
reasonable
protection
against
harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in
a particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Since our products are under
continual improvement, we reserve the right to make changes without
notice.
The material in this manual is the intellectual property of the vendor.
Further the vendor reserves the right to revise this publication and to
make changes to its contents without obligation to notify any party
beforehand. Duplication of this publication, in part or in whole, is not
allowed without first obtaining the vendor's approval in writing. Even
thought we have taken every care in the preparation of this user's manual,
no guarantee is given as to the correctness of its contents.
All the brand and product names are the property of their respective
owners.
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M7NCG400 and is the answer not in the manual?

Questions and answers

Summary of Contents for Biostar M7NCG400

  • Page 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits designed provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 2: Table Of Contents

    ENGLISH ...1 M7NCG 400 Features ... 1 Package contents ... 2 Layout of M7NCG 400 ... 3 CPU Installation ... 4 CPU/ System Fan Headers: JCFAN1/ JSFAN1/ JNFAN1 ... 4 DDR DIMM Modules: DIMMB1/DIMMB2/ DIMMA1 ... 5 How to install a DIMM Module ... 5 Jumpers, Headers, Connectors &...
  • Page 3: English

    English M7NCG 400 Features ® Supports the AMD Socket462 processor up to XP 3200+. Running at 200/266/333/400MHz Front Side Bus. Chipset North Bridge: nFORCE2 Crush 18G IGP Chipset. South Bridge: MCP Chipset. High Speed 800Mb/s Hyper-Transport interface to the MCP. Main Memory Supports up to 3 DDR devices.
  • Page 4: Package Contents

    Support TV formats: NTSC-M (North America and Taiwan) NTSC-J (Japan) PAL (Europe and Asia) On Board Peripherals Supports 360K, 720K, 1.2MB, 1.44MB and 2.88MB floppy disk drivers. Supports 2 serial ports. Supports 1 multi-mode parallel port. (SPP/EPP/ECP mode) Supports PS/2 mouse and PS/2 keyboard. Supports 2 back USB2.0 ports and 4 front USB2.0 ports.
  • Page 5: Layout Of M7Ncg 400

    Layout of M7NCG 400 JKBMS1 JKBV1 JUSBLAN1 JCOM1 JUSBV2 JPRNT1 JTV1 JCLK3 JVGA1 JSPKR1 Winbond Winbond Winbond Winbond SP-OUT JLIN1 LINE-IN JDJ1 JMIC1 MIC-IN JNFAN1 JGAME1 Chip Chip Chip Chip Codec Codec Codec Codec J_CODECSEL J1394A JCFAN1 PCI1 PCI2 PCI3 1394A 1394A 1394A...
  • Page 6: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU. Press the lever down.
  • Page 7: Ddr Dimm Modules: Dimmb1/Dimmb2/ Dimma1

    DDR DIMM Modules: DIMMB1/DIMMB2/ DIMMA1 For Dual-channel DDR (128-bit) high performance, at least 2 or more DIMM modules must be installed. (It has to be the combination of DIMMA and DIMMB.) With only one DIMM installed, the memory performs only at 64-bit. DRAM Access Time: 2.5V Unbuffered DDR 200/266/333 MHz Type required.
  • Page 8: Jumpers, Headers, Connectors & Slots

    Peripheral Component Interconnect Slots: PCI 1-3 This motherboard is equipped with 3 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards, which has, supplanted the older ISA bus standard in most ports. This PCI slot is designated as 32 bits.
  • Page 9 Wake On LAN Header: JWOL1 Front USB Header: JUSB1/ JUSB2 Pin Assignment Pin Assignment JUSB1/2 5V/ 5V_SB Selection for Keyboard and Mouse: JKBV1 JKBV1 Pin 1-2 on Pin 2-3 on Note: 5V Standby only use for S3 Mode. Front 1394 Header: J1394A/ J1394B (optional) J1394A/ B Data (-) Data (-)
  • Page 10 5V/ 5V_SB Selection for USB: JUSBV1/JUSBV2/ (JUSBV4=>optional) Note: 5V Standby only use for S3 Mode. Front Panel Connector: JPANEL1 Audio Subsystem: JF_AUDIO1/ JCDIN1 JF_AUDIO1 JAUDIO1 (Front Audio Header) (Front Audio Header) JUSBV1/ 2/ 4 Assignment Pin 1-2 on 5V Standby Pin 2-3 on PWR_LED ON/OFF...
  • Page 11 Assignment Mic In Mic Power RT Line Out Reserved LFT Line Out JF_AUDIO1 only support 2CH. Front Panel Audio Connector/ Jumper Block Jumper Setting Pin 5 and 6 Audio line out signals are routed Pin 9 and 10 to the back panel audio line out connector. No jumpers Audio line out and mic in signals are installed...
  • Page 12 Remove AC JCMOS1 power line Pin2-3 close AC power Reset the passwort as your will Frequency Selection: JCLK3 Open==> User mode (Default) Open==> User mode Close==> Safe mode or Close==> Safe mode (100MHz) JCLK3 JCLK3 Note: When overclock function failed and system is unable to boot-up, please follow the instruction below: Turn off the system.
  • Page 13 CNR Codec Primary/Secondary Selection: J_CODECSEL J_CODECSEL Pin 1-2 Pin 2-3 Digital Audio Connector: J_SPDIF1 SPDIF_OUT VCC5 J_SPDIF1 Audio DJ Header: JDJ1 (optional) Pin1 ==> SMBDT Pin2 ==> SMBCK Pin3 ==> -INTR_B Pin4 ==> Key Pin5 ==> PWRGD JDJ1 TV Out Header: JTV1 (optional) Pin1 ==>...
  • Page 14 Back Panel Connectors JKBMS1 JUSBLAN1 PS/2 LAN(Optional) Mouse PS/2 COM1 Keyboard JCOM1 JKBMS1 JUSBLAN1 PS/2 LAN(Optional) Mouse PS/2 COM1 Keyboard JCOM1 The LED indicator for Lan port status: Status Normal Speed Right light: green 10Mbps Left light: no Right light: green 100Mbps Left light: orange JPRNT1...
  • Page 15: Español

    Español Características del M7NCG 400 Soporta procesador AMD Corriendo a 200/266/333/400MHz FSB. Chipset North Bridge: nFORCE2 Crush18G IGP Chipset. South Bridge: MCP Chipset. High Speed 800Mb/s Hyper-Transport interface para el MCP. Memoria Principal Soporta hasta 3 dispositivos DDR. Soporto 200/266/333MHz (sin ECC) dispositivos DDR. High performance 128-bit DDR333 Twin Bank Memory Architecture.
  • Page 16: Contenido Del Paquete

    Resolución de pantalla de hasta 1024 x 768 (incluyendo todos los modos DOS) Soporta formatos de TV: NTSC-M (América del Norte y Taiwan) Periféricos On Board Soporta 360K, 720K, 1.2MB, 1.44MB y 2.88MB unidad de disquete Soporta 2 puertos serie. Soporta 1 multi-modo del puerto paralelo (modos SPP/EPP/ECP) Soporta ratón PS/2 y teclado PS/2.
  • Page 17: Disposición Del M7Ncg 400

    Disposición del M7NCG 400 JKBMS1 JKBV1 JUSBLAN1 JCOM1 JUSBV2 JPRNT1 JTV1 JCLK3 JVGA1 JSPKR1 Winbond Winbond Winbond Winbond SP-OUT JLIN1 LINE-IN JDJ1 JMIC1 MIC-IN JNFAN1 JGAME1 Chip Chip Chip Chip Codec Codec Codec Codec J_CODECSEL J1394A JCFAN1 PCI1 PCI2 PCI3 1394A 1394A 1394A...
  • Page 18: Instalación De La Cpu

    Instalación de la CPU Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU.
  • Page 19: Módulos Ddr Dimm: Dimmb1/Dimmb2/ Dimma1

    Módulos DDR DIMM: DIMMB1/DIMMB2/ DIMMA1 Para un alto funcionamiento, Dual-channel DDR (128-bit), por lo menos 2 o más módulos DIMM debe ser instalado. (Tiene que ser la combinación del DIMMA y DIMMB.) Con solamente un DIMM instalado, la memoria funciona solamente a 64-bit. DRAM Tiempo de Acceso: 2.5V Unbuffered DDR 200/266/333 MHz Tipo requerido.
  • Page 20: Conectores, Cabezales, Puentes Y Ranuras

    Conectores, Cabezales, Puentes y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalida Ultra DMA / 33/ 66/ 100. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...
  • Page 21 Cabezal Wake On LAN: JWOL1 Cabezal Frontal USB: JUSB1/ JUSB2 Contactos Asignacion Contactos Asignacion Data (-) Data (+) Tierra 5V/ 5V_SB Selección para Teclado y Ratón: JKBV1 JKBV1 Contactos Contactos Nota: 5V Standby solamente para el modo S3. Cabezal Frontal 1394: J1394A/ J1394B (opcional) Contactos Asignacion Contactos Asignacion J1394A/ B JUSB1/2...
  • Page 22 5V/ 5V_SB Selección para USB: JUSBV1/JUSBV2/ (JUSBV4=>opcional) Nota: 5V Standby solamente para el modo S3. Conector del Panel Frontal: JPANEL1 PWR_LED HLED PWR_LED ==> Corriente LED ON/ OFF Subsistema de Audio: JF_AUDIO1/ JCDIN1 JF_AUDIO1 (Cabezal de Audio Frontal) JUSBV1/ 2/ 4 Asignacion Contactos 1-2 on...
  • Page 23 Contactos Asignacion Entrada del MIC Corriente del MIC RT Salida de Linea Reservado LFT Salida de Linea JF_AUDIO1 only support 2CH. Conector del Panel Frontal de Audio/ Jumper Block Jumper Setting La senal de salida de linea del Audio Contacto 5 & 6 encamina al conector de la salida de linea Contacto 9 &...
  • Page 24 Quite el cable JCMOS1 de corriente Contactos del AC 2-3 cerrado Encienda Reconfigure la contrasena deseada o borre datos CMOS Selección de Frecuencia: JCLK3 Open==> Modo para el Usuario (Default) Open==> User mode (Default) Close==> Modo Safe (100MHz) Close==> Safe mode or JCLK3 JCLK3 CPU Clock 100MHz...
  • Page 25 Selección CNR Codec Primario/ Secundario: J_CODECSEL J_CODECSEL Contacto Contacto Conector Digital de Audio: J_SPDIF1 SPDIF_OUT VCC5 J_SPDIF1 Cabezal de Audio DJ: JDJ1 (opcional) Contacto1 ==> SMBDT Contacto2 ==> SMBCK Contacto3 ==> -INTR_B Contacto4 ==> NC Contacto5 ==> PWRGD JDJ1 Cabezal TV Out: JTV1 (opcional) Contacto1 ==>...
  • Page 26 Conectores del Panel Trasero JUSBLAN1 JKBMS1 (Opcional) Raton PS/2 Puerto Paralelo Teclado COM1 PS/2 JCOM1 JKBMS1 JUSBLAN1 JPRNT1 LAN(Opcional) Raton PS/2 Teclado COM1 PS/2 JCOM1 Estado del Indicador LED del LAN Estado Velocidad Indicador Derecho: Verde 10Mbps Indicador Izquierdo: Nada Indicador Derecho: Verde 100Mbps Indicador Izquierdo: Naranja...
  • Page 27: Deutsch

    Deutsch M7NCG 400 Features Unterstützung für AMD Prozessor(Sockel462 ) bis zu XP 3200+. FSB mit 200/266/333/400MHz.. Chipsatz Northbridge: nFORCE2 Crush 18G IGP Chipsatz. Southbridge: MCP. 800Mb/s Hohe Geschwindigkeit : Hyper-Transport -Interface zu den MCP Chipsatz. Hauptspeicher Unterstützung für 3 DDR Geräte. Unterstützung für 200/266/333MHz (ohne ECC) DDR Geräte.
  • Page 28: Verpackungsinhalt

    Anzeige Auflösung bis zu 1024 x 768 (enthält alle DOS-Modi) Unterstützung für die TV Formate: NTSC-M (Norden Amerika und Taiwan) On Board Peripherals 1 Floppy-Port mit Unterstützung für 2 Diskettenlaufwerke.(360KB, 720KB, 1.2MB, 1.44MB und 2.88MB) 2 serielle Schnittstellen. 1 parallele Schnittstelle mit Unterstützung für SPP/EPP/ECP-Modus. Unterstützung für PS/2-Maus und PS/2 -Tastatur.
  • Page 29: Layout Des M7Ncg 400

    Layout des M7NCG 400 JKBMS1 JKBV1 JUSBLAN1 JCOM1 JUSBV2 JPRNT1 JTV1 JCLK3 JVGA1 JSPKR1 Winbond Winbond Winbond Winbond SP-OUT JLIN1 LINE-IN JDJ1 JMIC1 MIC-IN JNFAN1 JGAME1 Chip Chip Chip Chip Codec Codec Codec Codec J_CODECSEL J1394A JCFAN1 PCI1 PCI2 PCI3 1394A 1394A 1394A...
  • Page 30: Installation Der Cpu

    Installation der CPU Ziehen Sie den Hebel seitwärts von der Sockel und neigen Sie ihn um 90-Grad nach oben. Suchen Sie Pin A im Sockel und den weißen Punkt oder die Abschnittkante in der CPU. Passen Sie Pin A mit dem weißen Punkt/der Abschnittkante zusammen und legen Sie danach die CPU ein.
  • Page 31: Ddr-Dimm-Modules: Dimmb1/Dimmb2/ Dimma1

    DDR-DIMM-Modules: DIMMB1/DIMMB2/ DIMMA1 Für Dual-Kanal DDR(128bit) mindenstens zwei oder mehr DIMM-Modules installieren. (Der Speicher mußt in der Kombination von DIMMA und DIMMB installiert werden.) DRAM Zugriffszeit: 2.5V unbuffered DDR 200/266/333 MHz Typen erfordert. DRAM Typen: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM-Module (184 pin) DIMM-Sockel Standort DIMMB1...
  • Page 32: Jumper, Header, Anschlüsse & Slots

    Audio, Netzwerk und Modem unterstützt. Peripheral Component Interconnect Slots: PCI 1-3 Dieses Motherboard ist mit 3 standardmäßigen PCI-Slots ausgestattet. PCI steht für Peripheral Component Interconnect und bezieht sich auf einem Busstandard für Erweiterungskarten, der den älteren ISA-Busstandard in den meisten Schnittstellen ersetzt hat.
  • Page 33 Wake On LAN Header: JWOL1 Front USB Header: JUSB1/ JUSB2 Pin Beschreibung Pin Beschreibung JUSB1/2 Front 1394 Header: J1394A/ J1394B (optional) Pin Beschreibung Pin J1394A/ B 5V/ 5V_SB Auswahl für USB: JUSBV1/JUSBV2/ (JUSBV4=>optional) Anmerkung: Die 5V reservierte Spannung für S3 Modus. Data (-) Data (-) Data (+)
  • Page 34 Anschlüsse auf der Vorderseite: JPANEL1 PWR_LED (+) (-) HLED ==> Lautsprecheranschl. HLED ==> Festplattenanzeige ==> Reset-Taste ==> Infrarotanschl. ==> Sleep-Taste PWR_LED ==> Stromanzeige EIN/ AUS ==> Ein-/ Ausschalttaste Audio Subsystem: JF_AUDIO1/ JCDIN1 JF_AUDIO1 JAUDIO1 (Front Audio Header) (Front Audio Header) Beschreibung Mic-In Mic Power...
  • Page 35 Audio-Anschl sse f r die Vorderseite/ Jumper-Block Jumper-Einstellen Audio-Ausgang-Singals werden zu der Audio- Pin 5 und 6 Ausgang-Anschluss an der R ckwand geleitet. Pin 9 und 10 Audio-Ausgang- und Mic-In-Singals sind verf gbar Kein Jumper f r Audio-Anschl sse an der Vorderseite. installieren Clear CMOS Jumper: JCMOS JCMOS1...
  • Page 36 Frequenz Auswahl: JCLK3 Anmerkung: Wenn “Überspanng Funktion” nicht gelungen ist folgen Sie bitte die Instruktion darunter: Bitte vausschalton Sie den AC-Notzstecker. Lassen Sie Pin 1-2 von JCLK3 geschlossen sein. Schließen Sie den AC-Notzstecker an. Betreten Sie “CMOS Setup Menü” und wählen sie Default-Setting. Ausschalten Sie den AC-Netzstecker wieder.
  • Page 37 5V/ 5V_SB Auswahl für Tastatur: JKBV1 JKBV1 Pin 1-2 geschlossen Pin 2-3 geschlossen Anmerkung: Die 5V reservierte Spannung für S3 Modus. Audio DJ Header: JDJ1 (optional) JDJ1 TV Out Header: JTV1 (optional) JTV1 Beschreibung die reservierte 5V Spannung Pin1 ==> SMBDT Pin2 ==>...
  • Page 38 Anschlüsse auf der Rückseite JUSBLAN1 JKBMS1 JPRNT1 (Optional) PS/2 Maus Parallel PS/2 COM1 Tastatur JCOM1 JUSBLAN1 JKBMS1 (Optional) JPRNT1 PS/2 Maus Parallel PS/2 COM1 Tastatur JCOM1 Die Signallampe für Lan-Port Status: Status Geschwindigkeit Lampe von rechts: grün 10Mbps Lampe von links: kein Lampe von rechts: grün 100Mbps Lampe von links: orange...
  • Page 39: Français

    Français M7NCG 400 Particularités Soutient le processeur d'AMD ® Socket462 jusqu'à XP 3200 +. Dirigeant à Autobus de Côté 200/266/333MHz de Devant. Chipset Pont du Nord : nFORCE2 Crush18G IGP Chipset. Pont du Sud : MCP Chipset. Hyper de vitesse haute 800Mb/s-transporte l'interface au MCP.
  • Page 40 Affichant une résolution de 1024 x 768 pixels (incluyant tout DOS mode) Soutient TV format : NTSC-M (Nord-Américain et Taiwan) NTSC-J (Japon) PAL (Europe et Asie) À bord Périphériques Soutient 360Ko, 720Ko, 1.2MB, 1.44MB et 2.88MB des conducteurs de disquette. Soutient 2 ports périodiques.
  • Page 41: Dessin D'm7Ncg 400

    Dessin d’M7NCG 400 JKBMS1 JKBV1 JUSBLAN1 JCOM1 JUSBV2 JPRNT1 JCLK3 JVGA1 JSPKR1 Winbond SP-OUT JLIN1 LINE-IN JDJ1 JMIC1 MIC-IN JNFAN1 JGAME1 Chip Codec J_CODECSEL J1394A JCFAN1 PCI1 MCP-T PCI2 BIOS PCI3 1394A Chip JUSB1 JUSB2 JUSBV1 J1394B FDD1 JATXPWER1 IDE2 IDE1 BAT1 J_SPDIF1...
  • Page 42: 9Th Touch Tm Is Nice Touch

    9th Touch is NICE TOUCH [9th Touch] means users could enjoy the speed, safety & convenience when respective booting requirement. The easiest way is just to touch 「F9」 function key during booting procedure to choose any device you like to boot for the system. Forget about entering CMOS, rebooting activities.
  • Page 43: Bios Star -[ Flasher™ ]

    CMOS and do it. Flasher Step by Step 1. Download the latest BIOS file from the BIOSTAR website to a floppy disk. 2. Insert the disk that contains the newest BIOS file into the floppy drive. 3. Power ON the computer.
  • Page 44 6. Press " Arrow Up/Down " key to choose BIOS file, refer to Figure 2 Press [Enter] to load the BIOS from the floppy disk, refer to Figure 3. Figure 1 Figure 2...
  • Page 45 8. At the prompt "Are you sure to flash (Y/N) ", press [Y] to flash BIOS or [N] to cancel the flashing process, refer to Figure 4. After pressing [Y], the flash starts to process, refer to Figure 5. Figure 3 Figure 4...
  • Page 46 10. A message " Flash done, Restart System (Y/N) " will appear if the system was successfully updated the BIOS, refer to Figure 6. Figure 6 11. Press [Enter], then the flashing is done!
  • Page 47: Watchdog Technology

    Watchdog Technology It is important to know that when overclocking, the system can be at a vulnerable state. Therefore, the BIOSTAR Watchdog Technology was designed to protect your PC under dangerous over-clock situations. Any over-clocking that reaches the threshold settings, the Watchdog Technology will disable your system from rebooting in the BIOS setting.
  • Page 48: Trouble Shooting

    Trouble Shooting PROBABLE No power to the system at all Power light don’t illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on PROBABLE System inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is spinning. PROBABLE System does not boot from hard disk drive, can be booted from CD-ROM drive.
  • Page 49: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE No hay corriente en el sistema. La luz de corriente no ilumina, ventilador dentro de la fuente de alimentación apagada. Indicador de luz del teclado apagado. CAUSA PROBABLE Sistema inoperativo. Luz del teclado encendido, luz de indicador de corriente iluminado, disco rígido está...
  • Page 50: Problemlösung

    Problemlösung MÖGLICHE URSACHE Das System hat keine Spannungsversorgung. Die Stromanzeige leuchtet nicht, der Lüfter im Inneren der Stromversorgung wird nicht eingeschaltet. Tastaturleuchten sind nicht an. MÖGLICHE URSACHE System funktioniert nicht. Tastaturleuchten sind Stromanzeige leuchtet, die Festplatte dreht sich. MÖGLICHE URSACHE Das System wird von der Festplatte nicht hochgefahren, vom CD-ROM-Treiber aber ja.
  • Page 51 08/26/2003...

Table of Contents