SPEX SamplePrep 8000M MIXER/MILL Operating Manual page 12

(If not included in your Order, they are Available for Purchase at Additional Cost)
8005 Zirconia Ceramic Vial Set
Vial size 2 1/2 in. diameter x 2 11/16 in. Solid zirconia
ceramic vial, cap, and two 1/2 in. balls; seven corprene
gaskets. Grinding load approximately 2-8ml; mixing load
approximately 20ml.
8007 Stainless Steel Vial Set
Vial size 2 1/4 in. diameter x 3 in. Vial body and cap
liner made of hardened 440C stainless steel. Two 1/2 in.
and four 1/4 in. stainless steel balls are included. Set
includes screw-on cap with O-ring to permit wet or dry
grinding/mixing. Grinding load 3–10 ml; mixing load
approx. 25 ml.
8008 Silicon Nitride Vial Set
Vial size 2 1/2 in. diameter x 2 11/16 in. solid silicon
nitride vial, cap, and two 1/2 in. balls; seven corprene
gaskets. Grinding load approximately 2-8ml; mixing load
approximately 20ml.
8009 Round-Ended Hardened Steel Vial Set
Vial size 2 3/8 in. diameter x 3 in. Hardened steel vial
body has grinding chamber with rounded ends for more
efficient grinding/mixing. Includes screw-on cap and O-
ring for wet or dry use, two 1/2 in. and four 1/4 in. steel
balls. Grinding load 3-10ml; mixing load approximately
25ml.
Page 12 of 12
SN 03000 and Higher
7.0 Accessories: Grinding/Mixing Vials
To Order any of these accessories, call Customer
Service at 800-522-7739 or 732-549-7144
SPEX Certiprep
8000M Mixer/Mill
4.4.03