FusionModule1000A40 Prefabricated All-in-One
Data Center
Initial Configuration Parameter Manual
1
This chapter describes the notes for using the initial configuration manual.
●
●
●
●
●
●
●
●
Issue 02 (2021-02-10)
Initial Configuration Manual Usage
This document only describes initial configuration parameters used in the
commissioning, operation, and maintenance (O&M) of a data center.
The system configuration parameters are essential to reliable running of the
system. Improper modifications of parameters may easily cause abnormal
running status, or even damage to the system. You are not allowed to modify
configuration parameters without permission when using the data center. If a
modification is necessary, contact Huawei technical support. Huawei shall not
be responsible for any loss caused by unauthorized configuration
modification.
You can modify initial configurations under the guidance of Huawei
engineers. Huawei assumes no liability for any loss caused by unauthorized
changes to the initial configurations.
Some parameters mentioned in this document should be provided and
configured by onsite technical support engineers based on the actual
application of the data center.
If parameters need to be modified during the running of systems, the
operator should be a professional in this field and familiar with each system
and its working principles.
Before performing an operation, ensure that the prerequisites are met.
Otherwise, the expected result may not be achieved. More seriously,
equipment damage and personal injury may occur.
Before using this document, read through and keep in mind the safety
precautions in this document, the precautions in each chapter or section, and
the cautions and notes for operations.
Precautions provided in this document are only supplementary to the local
laws and regulations governing the data center.
Copyright © Huawei Technologies Co., Ltd.
1 Initial Configuration Manual Usage
1