Advertisement
5.5.2.
Option 2:
Use the Master code to open the door. When the display shows "OPEN" and the LCD background light switches to blue back lighting,
press "*" (CLEAN) key, the system will change to 'Master code state' with display showing "-------". Now input an 8 digit new Master code.
Then press "#" key to confirm.
5.6.
Open door
5.6.1.
Press "#" key, input code and press "#" to confirm, display shows "OPEN". The electromagnet releases for 6 seconds, the door can be
opened or locked within this time.
5.7.
Alarm modes
5.7.1.
Vibration alarm
With the safe in its 'sleep' state, press "0" key once, the display will show "ALERT ON" and the safe will enter its alarm state.
During the alarm state input the correct code and the display will show "OPEN". If an incorrect code is entered the alarm will sound
automatically for a minute. The alarm state is not removed.
5.7.2.
Wrong code alarm
If the wrong code is entered 3 times the safe will automatically enter its alarm state.
5.8.
Setting year, month, week and time
5.8.1.
Press "*" key, the display will flash. Input the year, month, day, week and time, the system will save the information.
5.9.
Door opening recording
5.9.1.
Input the correct code and open the door when "OPEN" on the display disappears and the blue back lighting is still on, press the "0" key.
5.9.2.
The display will show the last time the door was opened, first showing the date, then time and lastly indicating the last code entered to
open the door. "PASS1" is a personal code and "PASS2" is the master code for opening the door.
5.9.3.
When "PASS1" or "PASS2" on the display does not show, press the "0" key again and the display shows the previous door opening
record, In this way it is possible to look at the previous 14 door opening records.
5.10.
Low Battery
5.10.1.
the safe uses 4 x 1.5V alkaline batteries. "LO BATTE" on the display indicates low battery voltage and the batteries require replacement.
5.10.2.
if the battery voltage is too low use the external battery holder and insert its plug into the port on the bottom edge of the display panel,
see fig.2.
Parts support is available for this product. Please contact sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
sCFS01.V2, SCFS03.V2 | Issue:2(5) 01/03/18
Advertisement
