Autel Robotics X-Star Manual page 31

IMPORTANT
It is recommended to wear protective gloves when assembling or removing
the propellers to protect you from the sharp edges. Use tools (e.g., wrench,
plier, etc.) when necessary.
On each of the propellers there is one Lock icon and one Unlock icon indicating
the rotate direction to fasten or unfasten the propellers.
¾
To install the propellers
1.
Match two of the propellers
with red
corresponding motors with
red paint, and the other two
with silver/black nuts to the
unpainted motors.
2.
Fasten the propeller by rotating in the direction indicated by the
printed on the propeller.
¾
To remove the propellers
1.
Power off the aircraft.
2.
Unfasten the propeller by rotating in the direction indicated by the
icon printed on the propeller.
IMPORTANT
• Check and ensure every propeller is stably mounted and in good
condition before each flight. Do not use aged or damaged propellers.
• Power off the aircraft before installing or removing the propellers.
Keep off the propellers or motors when they are spinning. Remove the
propellers when testing the motors' operation.
TIPS
It is recommended to remove the propellers when the aircraft is not in use.
Fasten the propeller by rotating the propeller
in the indicated direction.
Unfasten the propeller by rotating the
propeller in the indicated direction.
nuts to the
icon
25