EN
9.4 In case of power failure
The current programme and its setting will be saved.
When power supply is restored operation will be re-
sumed.
If a power failure cuts an operating wash programme
door opening is mechanically blocked. To get out any
laundry water level should not be seen in the glassy
porthole of the door - Danger of burns! Water level has
to be lowered as described in "Pump fi lter". Not till then
pull lever (A) beneath service fl ap (Fig. 9-1) until door
is unlocked by a gentle click. Afterwards refi x all parts.
Note: Unlock the door
When the washing machine in a safe state (under the water level below the window
along a certain distance, barrel temperature below 55 °C, the inner barrel did not turn),
may unlock the doors of the machine operation
9-Troubleshooting
9-1
A
27
Need help?
Do you have a question about the HWD80-B14979 and is the answer not in the manual?
Questions and answers