Numbering Slots And Ethernet Ports - Fujitsu BS2000 SE Series Operating Manual

Additive Components

3.2.3 Numbering slots and Ethernet ports

Many CLI commands require users to enter port numbers as part of the command syntax, and many show
command outputs display port numbers. The port numbers are entered and displayed in stack-unit/slot number/port
number format.
The Brocade ICX 7750-48F switch contains the following slots and Ethernet ports:
Slot 1 and Slot 2 are located on the front of the Brocade ICX 7750-48F device. Slot 1 contains 1/10 GbE SFP+
ports 1/1 through 1/48, with odd port numbers on the top row and port 1/1 on the left.
Slot 2 contains 10/40 GbE QSFP+ ports XL2/1, XL2/3, and XL2/5 on the top row (left to right), and ports XL2/2,
XL2/4, and XL2/6 on the bottom row (left to right).
Slot 3 is located on the rear of the Brocade ICX 7750 switches and contains ports XL3/1, XL3/3, and XL3/5 on
the top row (left to right) and ports XL3/2, XL3/4, and XL3/6 on the bottom row (left to right). These ports are 10
/40 GbE QSFP+ ports.
Figure 15: Net Unit (ICX 7750-48F) - Numbering of the slots (front)
Explanation:
1 Slot 1
2 Slot 2
Figure 16: Net Unit (ICX 7750-48F) - Numbering of the slots (rear)
Explanation:
3 Slot 3 (not employed; may not be used by the customer)
33