Fujitsu BS2000 SE Series Operating Manual page 22

Additive Components
The MAC addresses entered on the green ID card refer to LAN #1 (SYS1) and #2 (SYS2).
The MAC addresses of LAN ports #3 (not used) and #4 (not used) are then the next two MAC addresses in
ascending order. The green ID card is located on the front of the Application Unit, see item 1 in
Indicators on the power supply units
Figure 9: Indicators on the power supply units
No. Meaning
1 Power supply unit fault indicator and warning indicator:
Lights up amber when a critical event occurs (power supply unit switches off).
Call Customer Support.
Assignment of the PCIe slots System LAN port
Figure 10: Principle of PCIe slot assignment at the rear of the device (AU47 M3)
The figure shows the PCIe slots of the AU:
S1 is equipped with a 4-port LAN controller.
Slots S2 through S10 are not equipped in the figure.
figure 1/2 .
22