Silvercrest SBKO 4.0 A1 User Manual And Service Information page 90

SilverCrest SBKO 4.0 A1
 connected cables are always laid in such a manner
that nobody can step on them or trip over them.
There is a risk of injury
 no objects are placed on a connected cable and
cables are not connected over sharp edges because
they could be damaged otherwise.
It is necessary to repair the headphones if they have
been damaged in any way, for example, if the housing
is damaged, if liquid or objects have penetrated the
device or if the product has been exposed to rain or
moisture. Repair work is also required if the device is
not working properly or has been dropped. If smoke is
produced, or there are any unusual sounds or smells,
turn the headphones off immediately. In such cases, the
headphones should not be used until they have been
inspected by authorised service personnel. Only have
the device repaired by qualified personnel. Never open
the housing of the headphones.
Only use a clean, dry cloth for cleaning the
headphones and never use any corrosive liquids. Use a
slightly moistened cloth and a mild cleaning agent to
remove stubborn dirt.
Remove the ear pads in order to clean them. Clean the
ear pads under running water. Dry the ear pads well.
Put the ear pads on again only when they are
88 - English
WARNING! Maintenance
/ cleaning