European Conformity According To Red (2014/53/Eu) - Panasonic PAN9520 Integration Manual


PAN9520 Wi-Fi Module
French
Obligations d'étiquetage
Les fabricants d'équipements d'origine (FEO) – en anglais Original Equipment
Manufacturer (OEM) – doivent s'assurer que les obligations d'étiquetage IC du
produit final sont remplies. Ces obligations incluent une étiquette clairement
visible à l'extérieur de l'emballage externe, comportant l'identifiant IC du
module Panasonic inclus, ainsi que la notification ci-dessus.
L' identifiant IC est: IC: 216Q-9520
Cet identifiant est valide pour module
produits finaux doivent indiquer sur leur emballage externe la mention
suivante:
"Contient IC: 216Q-9520"

6.5 European Conformity According to RED (2014/53/EU)

All modules described in this Module Integration Guide comply with the
standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU)
together with RED (2014/53/EU) articles.
Standards
•
The end product OEM has to re-assess the conformity of the end product to EU
regulations, but can use the PAN9520 RED pre-assessment to shorten this procedure.
•
The RED EU Type Examination Certificate No. T818887N-01 issued by the Notified
Body 0682 can be used for the OEM end product conformance assessment. If a Notified
Body has been contracted for the end product conformity assessment, it should be noted
that this EU Type Examination Certificate should be used for conformance assessment.
As a result of the OEM end product conformity assessment procedure described in 2014/53/EU
Directive and other applicable EU directives, the end customer equipment should be labelled as
follows:
The requirements for CE marking are described in regulation (EU) No. 765/2008
Annex II.
Module Integration Guide Rev. 1.1
6 Regulatory and Certification Information
PAN9520. Dans tous les cas les
Page 41 of 44