WASHER QUICK GUIDE
Laundry Aid
Dispenser
A
4
1
2
3
Chamber 1:
Prewash detergent* (powder
ONLY)
Chamber 2:
Powder or liquid HE
detergent* (Move plastic
partition to slot A when using
liquid or store in slot B when
using powder.)
Chamber 3:
1-2 Tbsp. fabric softener
Extra Chamber 4:
Bleach
IMPORTANT!
*Use only High
Efficiency (HE)
detergent in the correct
dosage for your
machine (1-2 TBSP of
powder detergent (or
liquid equiv.) per load.
>>>
Before using your washer for the first time, run a
Using your new Splendide washer is easy!
Laundry Aid Dispenser
1
Press ON.
The symbols on the display will light.
Load the drum.
Be sure the laundry
has been sorted by fabric color/type
and all pockets are empty.
Load the dispenser
(See left).
SEE BACK PAGE FOR 'CLEAN WASHER' AND 'WINTERIZATION' INSTRUCTIONS
'Clean Washer' cycle (see back page) .
2
SELECT A
CYCLE
Select a wash cycle.
The optimal spin
and temperature settings for that cycle
will be shown on the display.
Use buttons to customize the cycle.
Any spin and temperature settings you
modify will be saved and preselected
the next time this cycle is used.
1
Display
Spin +
Wash Rinse
Hot
Drai n
Super
Wash
DISPLAY
Pre
Wash
Post Cycle
Care
Cold
Slow
Fast
Spin
Delay
Extra
Temp.
Speed
Start
Rinse
3
Press and HOLD the START button
for 2 seconds, then release it.
will indicate the cycle is accepted.
NOTE: Your washer uses state-of-the-art
safety and performance technologies.
Water will enter the drum AFTER
certain load criteria have been
measured and met (up to 2 minutes).
To pause the cycle
tap the START/
PAUSE button once. To unpause, press
and hold 2 seconds, then release.
To cancel the cycle
Press and hold the
ON/OFF button. The cycle will stop, any
water will drain, and the machine will
shut off.
> > >
QR -W
WFL1300XD
A BEEP
Need help?
Do you have a question about the WFL1300XD and is the answer not in the manual?
Questions and answers
We have a Code f1