Om-Em Software Toolset - Motorola OM 2000 Installation & Operation Manual

4 SETUP AND OPERATION
Figure 4-6 — OM-EM Main window

OM-EM Software Toolset

The OM-EM is the primary interface to the OM for setup and operation. It is a
remote user interface based on a Java application that enables you to monitor an
OM 2000 remotely and locally. The software toolset has four drop-down lists that
enable access to screen-sets, as follows:
•
System — provides screen-sets to reboot the OM, invoke pop-up information
about the OM, or exit the OM-EM application.
•
Configuration — provides screen-sets to configure OM parameters for the
system.
•
Status — provides the capability to view any of the status reports and to save all
of them to a text file.
Windows within a majority of the screen-sets are tab selected. Each window has
operating buttons that appear at the bottom-right.
Table 4-2 — OM-EM Software Toolset Button Functionality
Button
Close
Apply
28
Function
Closes the dialogue. All changes
not applied are lost.
Saves (writes) all changes to the
OM. For dynamic fields,
changes take effect
immediately. Changes to fields
that are not dynamic require the
OM to be rebooted to take
effect.
State
Always enabled
Always enabled