Install Wallbox - Volkswagen Elli Charger Manual

5. Install wallbox

EN
DANGER
Working on electric installations without proper precautions will result in the risk of
electric shock, which will cause severe injuries or death.
— Switch off input power before installing the charging station. Keep the power off

until the charging station is fully installed with its front cover installed and secure.
— Do not switch on the charging station if the front cover is not installed or not secure.
— Do not install a faulty charging station or a station with a noticeable issue.
Installation or repairs by non-qualified electricians will result in the risk of electric shock,
which will cause danger to the user, severe injuries or death.
— The installation must only be performed by qualified electricians.
WARNING
Installing the wallbox during wet environmental conditions (for example rain or fog) can
result in the risk of electric shock and damage to the product, which can cause severe
injuries or death.
— Do not install the wallbox during wet environmental conditions (for example rain or fog)

and do not open the wallbox in such environmental conditions.
A damaged charging cable can result in the risk of electric shock, which can cause danger
to the user, severe injuries or death.
— Make sure that the charging cable is positioned so that it will not be stepped on,

tripped over, driven over or otherwise subjected to excessive force or damage. Wind
the charging cable around the charging station, making sure that the charging plug
does not touch the ground.
— Only pull on the charging plug hand grip and never on the charging cable itself.
CAUTION
A front assembly with cracks in the glass can cause the wallbox to become a hazardous
object, and thus result in the risk of injuries.
— If the glass of the front assembly breaks, have the front assembly replaced immediately

by a qualified electrician.
Not taking precautions against ESD (Electrostatic discharge) can damage electronic
components in the wallbox.
— Take the necessary precautions against ESD before touching electronic components.
22 Elli Charger