Table of Contents
Advertisement
Display
Contents of Alarms
Hydraulic Oil Overheat Alarm
Axle Oil Temperature Alarm
Transmission Oil Temperature
Alarm
Engine Trouble Alarm
Transmission Alarm
Engine Oil Pressure Alarm
Boost Temperature Rise Alarm
Auto Brake Warning Alarm
Transmission Filter Clogging
Transmission Oil Pressure
Alarm
Main Pump Oil Pressure Alarm
OPERATOR'S STATION
Hydraulic oil temperature is above normal. Stop operation. Run the
engine at slow idle speed to lower the oil temperature.
Axle oil temperature is above normal. Check if the service brake drags.
Transmission oil temperature is above normal. Stop operation. Run
the engine at slow idle speed to lower the oil temperature.
Use correct range for machine operation, and do not stall torque
converter.
Engine or engine related parts are abnormal. Immediately set the
machine in the park position, apply parking brake, stop the engine
and contact your authorized dealer.
Transmission or transmission related parts are abnormal. Immediately
set the machine in the park position, apply parking brake, stop the
engine and contact your authorized dealer.
Engine oil pressure has decreased.
Immediately stop the engine, and apply parking brake. Check the
engine oil system and oil level.
Intake air temperature is abnormally high. Stop operation. Check
intercooler for clogging and intake air piping connections.
Auto brake system is abnormal.
Safely park the machine and stop the engine immediately. Check
hydraulic oil level and auto brake system for damages and leaks.
Transmission filter elements are clogged.
Replace transmission oil filter following the instruction in the
operator's manual.
Transmission oil pressure is too low. Safely park the machine. Check
transmission oil level and check for leaks.
Main pump oil pressure has decreased. Stop machine operation, and
apply parking brake. Check the piping of front attachment for oil
leaks.
1-31
Remedy
Advertisement
Table of Contents
Troubleshooting
