Hitachi ZW 370-6 Operator's Manual page 225

4. Check that bucket control lever (5) and lift arm control
lever (6) are in the neutral (N) position.
6
5
Fingertip Control Type
5. Check that control lever lock switch (11) is in the
locked ( ) position.
6. Adjust the position of outside rear view mirror (8) and
inside rear view mirror (9) so that the best rear visibility
can be obtained.
7. While seated on the operator's seat with your back in
contact with the backrest, adjust each function of the
seat so that the brake pedal can be fully applied.
8. Fasten seat belt (10) along your body without kinking
or twisting it. Be sure the buckle firmly snaps when
coupled and works as it should, and the retractor and
anti-synch mechanism work as designed.
9. Inspect seat belt.
OPERATING THE ENGINE
5, 6
MNEC-07-001
3-5
Multi-Function Joystick Type
9
8
MNEC-01-043
11
MNEC-07-001
M4GB-01-126
10
MNEC-01-045