When GNSS is available
Flight Limits
Max Altitude Aircraft's altitude cannot exceed the specified value
Max Radius
Flight distance must be within the max radius
Only Downward Vision System is available
Flight Limits
Height is restricted to 30 m when the GNSS signal is weak.
Max Altitude
Height is restricted to 5 m when the GNSS signal is weak
and light conditions is not sufficient.
The restrictions on the radius are disabled and warning prompts cannot be received in
Max Radius
the app.
The altitude limit when the GNSS is weak will not be restricted if there was a strong GPS signal
when the aircraft was powered on.
If the aircraft reaches a limit, you can still control the aircraft, but you cannot fly it any further. If
the aircraft flies out of the max radius, it will automatically fly back within range when the GNSS
signal is strong.
For safety reasons, do not fly close to airports, highways, railway stations, railway lines, city
centers, or other sensitive areas. Fly the aircraft only within your line of sight.
GEO Zones
All GEO zones are listed on the DJI official website at http://www.dji.com/flysafe. GEO zones are divided
into different categories and include locations such as airports, flying fields where manned aircraft
operate at low altitudes, borders between countries, and sensitive locations such as power plants.
There will be prompts in the DJI Fly app to fly in GEO zones.
Pre-Flight Checklist
1. Make sure the remote controller, mobile device, and Intelligent Flight Battery are fully charged.
2. Make sure the Intelligent Flight Battery and the propellers are mounted securely.
3. Make sure the aircraft arms are unfolded.
4. Make sure the gimbal and camera are functioning normally.
5. Make sure that there is nothing obstructing the motors and that they are functioning normally.
6. Make sure that DJI Fly is successfully connected to the aircraft.
7. Make sure that the camera lens and Vision System sensors are clean.
8. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI
certified manufacturers may cause system malfunctions and compromise safety.
DJI Air 2S User Manual
DJI Fly App
Warning: Height limit reached
Warning: Distance limit reached
DJI Fly App
Warning: Height limit
reached.
©
2021 DJI All Rights Reserved.
47
Need help?
Do you have a question about the Air 2S and is the answer not in the manual?
Questions and answers
I just get a replacement Air2s today and I would like to know if I have to reset it before the first flight for the new drone.
No, there is no requirement to reset the DJI Air 2S before the first flight. However, it is important to check if the flight environment meets all necessary requirements, set the Return-to-Home (RTH) altitude, and ensure the propellers and battery are securely installed.
This answer is automatically generated
yes, my old one fly a way and I just get the new one for replacement.