Sealey SA660 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. SAfETY
WARNING! ensure health & safety, local authority, and general workshop practice regulations are adhered to when using this
‰
equipment.
WARNING! disconnect from air supply before changing accessories or servicing.
‰
Maintain the needle scaler in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may
‰
be dangerous and will invalidate the warranty.
WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
‰
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all connections are
9
secure.
Only use needles which are specifically designed for use with a needle scaler.
9
Wear approved safety eye/face shield, ear defenders, and hand protection.
9
Maintain correct balance and footing. ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and non essential persons away from the working area.
9
DO NOT use the needle scaler for a task it is not designed to perform.
8
WARNING! DO NOT use needle scaler if damaged or thought to be faulty. (Contact Sealey service agent).
‰
DO NOT use needle scaler unless you have been instructed in its use by a qualified person.
8
DO NOT carry the needle scaler by the air hose, or yank the hose from the air supply.
8
DO NOT operate needle scaler if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT carry needle scaler with your hand on the power trigger in order to avoid unintentional starting.
8
DO NOT direct air from the air hose at yourself or others.
8
When not in use disconnect from air supply and store in a safe, dry, childproof location.
9
2. INTRODuCTION
Suitable for cleaning heavy paint and rust scale from metal surfaces. Composite housing protects user from chill and helps to reduce
vibration. Soft-grip handle and in-line handle provide added comfort and control. Spare needle sets are readily available.
3. SPECIfICATION
Stroke: ......................................................................... 38mm
Free Speed: ............................................................ 4500bpm
Air Consumption:.......................................................... 12cfm
operating Pressure: ...................................................... 90psi
Air Inlet Size: .............................................................1/4"BSP
Weight: .......................................................................... 1.7kg
noise Power: ..........................................................107.1dB.A
noise Pressure: .......................................................97.1dB.A
Vibration: .................................................................... 6.3m/s²
Uncertainty: .............................................................. 3.15m/s²
4. PREPARATION
© Jack Sealey limited
AIR NEEDLE SCALER COMPOSITE PISTOL TYPE
Model no:
Wear protective Wear safety
gloves footwear
Original Language Version
SA660
Wear ear
protection
fig.1
SA660 Issue 3 (HF) 13/06/18