Table of Contents
Advertisement
IMPORTANT! KEEP FOR FUTURE REFERENCE:
1. WARNING: Never leave your child unattended. The safety of your child is your responsibility
2. The bottom mattress base position is the safest. You should always use the cot in this lowest
position as soon as your baby is old enough to sit up.
3. WARNING: Do not leave anything in the cot or place the cot close to another p roduct, which
could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blind /curtain
cords etc.
4. When choosing mattress, ensure that the height between the surface of the mattress and the
top edge of the cot side is at least 50cm for the lowest position and 20cm in the upper position.
5. There should never be a gap of more than 3cm between the ma ttress and the sid es or ends
of the cot.
6. Regularly check that nuts and bol ts are secure or evidence of damage, which could make the
bed unsafe. Loose fittings can result in snagging clothes or cords posing a risk of s trangulation.
7. The maxi mum height (i .e. upper surface) of any mattress fitted must not exceed safety mark
engraved on the inside of the cot end.
8. We recommend the use of Tutti Bambini mattress for this cot bed or a minimum mattress
measuring 70cms x 1 40cm.
9. WARNING: Do not use more than one ma ttress in the cot. Do not use a mattress with a depth
greater than 100mm.
10. Clean with a damp cloth, do not use abrasives or bleach.
11. If you leave the child unattended in the cot, always make sure that the dropside is in the
highest position.
12. WARNING: Do not use the cot if any part is broken, torn or missing and use only spare
parts approved by Tutti Bambini.
13. To prevent child injury f rom falls, the cot should not be used when a child can climb out from the cot
14. Excessive chewing may damage the wood and cause splin tering. If any part is damaged, stop
using the cot until the correct part has been replaced.
15. WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric
bar fi res, gas fires etc in the near vicinity of the cot.
16. All assembly fittings should always be tightened properly and fittings should be checked
regularly and re-tightened as necessary.
17. The cot bed is intended for use for children from birth to approxima tely 4 years of age. The child 's
bed is suitable for child ren who have outgrown the cot (approxima tely 18 months) up to the age of
4 yea rs. the cot can also be used as a sofa.
18. WARNING: Do not place this child 's bed near heat sources, windows and other furniture.
19. Children are li kely to play, bounce, jump and climb on beds, therefore the child 's bed should not
be placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords,
and should be placed either tight to any wall or have a cap of 300mm be tween the wall and the side
of the bed.
20. When choosing a mattress, ensure that the height between the surface of the mattress to the upper
edge of the side rails is at least 500mm in the lowest position and at least 200mm in the highest
position.
21. There should never be a gap of more than 30mm between the ma ttress and side or the ends of the
cot. Product development dictates that componen ts may occasionally differ from the ones shown
in the diagrams of th ese instructions. The right to change the specifications and design of the
furni ture without prior notice remains with the manufacture.
Guarantee
All our products are produced from the fin est quali ty materials and are manufactured under the s trictest
quali ty controls. We guarant ee all our p roducts or parts thereof against faulty manufacture for a period of
one year from date of pu rchase This guarantee is not effective against accidental damage or damage
caused by incorrect use or neglect. This does not affect your statutory rights.
This product has been designed and manufactured to EN716:2017+AC:2019 and BS 8509:2008+A1:2011.
102-0070 Tutti Bambini Bed assembley instructions.indd 9
Safety advice and maintenance
READ CAREFULLY
www.tuttibambini .com
24/09/2018 12:39
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Modena Cot Bed and is the answer not in the manual?
Questions and answers
I’m trying to turn the cot into a sofa and it doesn’t seem as tho the triangles are aligned properly to the bed. I can either screw the bottom C bolts in or the top bolt can’t do both.
@Amah Kabran you have to flip the base, I'm currently struggling with mine, took me ages to figure out the base, I'm turning mine into a bed but now my footboard is lower i can't get that to fit but as a sofa it would
The assembly instructions mention using triangle braces for support when assembling the bed. To properly align the triangles when converting the Tutti Bambini Modena Cot Bed into a sofa, follow these steps:
1. Assemble the mattress base using the specified bolts.
2. Attach the triangle braces support with the designated mattress base supports.
3. Use the correct bolts (e.g., B and C bolts) as indicated in the instructions.
4. Ensure all bolts are securely tightened to maintain stability.
5. Confirm proper alignment by checking that the braces provide even support across the structure.
Always refer to the assembly instructions for exact positioning and safety guidelines.
This answer is automatically generated
Hi do you have any replacement hardware part 3 (part of the foot of the bed) to turn back into a cot from a cot bed? In the grey colour
How do I put the cot down
To lower the Tutti Bambini Modena Cot Bed, adjust the mattress base to a lower height position. The cot bed has three height positions, allowing you to lower it as your child grows. Ensure that the height between the mattress surface and the top edge of the cot side meets safety requirements: at least 50 cm in the lowest position and 20 cm in the upper position. Always check that nuts and bolts are secure after making adjustments.
This answer is automatically generated
I’ve miss placed the screws and fixings could I buy. Ore