Advertisement
Advertisement
Table of Contents
Related Manuals for Tutti Bambini Roma mini
Summary of Contents for Tutti Bambini Roma mini
- Page 1 Roma mini Cot Bed Assembly Instructions...
- Page 2 Conforms to BS EN 716-1&2:2008 and BS8509+A12011 Tutti Frutti Di rect Ltd. Unit 3, 1000 North Circular Road, London, UK, NW2 7JP t: + 44 (0) 208 368 5800 e: customerservice@ tuttibambini.co.uk www. tuttibambini.com Roma mini Cot Bed 211159 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
- Page 3 • Damaged part number • A photo or video of the damaged part Tutti Bambini guarantee your product against faulty manufacture for a period of 12 months from date of receipt of purchase. This does not affect your statutory rights www.tuttibambini.com...
- Page 4 Parts List back right front left back left front right Hardware List 10 pcs For back mattress support bar For triangle braces to convert Into bed 12 pcs 11 pcs M6x35mm Bolts 14 pcs For mattress slats only For fixed side rail M6x25mm Bolts For front mattress support bar...
- Page 5 Assembling into cot Important note:First tighten all bolts by hand only, do not tighten all bolts with Allen Key until all parts have been fully assembled. C x 4 PCS 55mm D x 2 PCS 35mm F x 1 PCS Assemble the 2 ends with fixed rail Assemble back mattress support using 4 x C bolts...
- Page 6 Assembling into cot C x 4 PCS 55mm F x 1 PCS Assemble fixed rail using 4 x C bolts IMPORTANT NOTE: The bottom mattress base position is the safest. You should always use the cot in this lowest position as soon as your baby is old enough to sit up www.tuttibambini.com...
- Page 7 Assembling drawer A x 10 PCS B x 5 PCS Assemble bolts Assemble nuts B x 5 PCS Slide the drawer into the wooden channels Assemble nuts located at the bottom of the cot bed ends NOTE: Please slide the drawer in from the side of cot bed where the drawer runner is closer to the post.
- Page 8 Assembling into bed D x 2 PCS D x 2 PCS 35mm 35mm Assemble back mattress support bar Assemble front mattress support bar using 2 x D bolts using 2 x D bolts D x 4 PCS D x 4 PCS 35mm 35mm C x 2 PCS...
- Page 9 Assembling into bed E x14 PCS 25mm Assemble mattress base using 14 x E bolts Slide the drawer into the wooden channels located at the bottom of the cot bed ends www.tuttibambini.com...
- Page 10 Assembling into a SOFA C x 4 PCS D x 2 PCS 55mm 35mm Assemble the 2 ends with fixed rail Assemble back mattress support using 4 x C bolts bar using 2 x D bolts D x 4 C x 2 C x 2 PCS 55mm D x 2 PCS...
- Page 11 Assembling into a SOFA E x 14 PCS 25mm Assemble mattress base Slide the drawer into the wooden channels using 14 x E bolts located at the bottom of the cot bed ends www.tuttibambini.com...
- Page 12 7. The maxi mum height (i .e. upper surface) of any mattress fitted must not exceed safety mark engraved on the inside of the cot end. 8. We recommend the use of Tutti Bambini mattress for this cot bed or a minimum mattress measuring 70cms x 1 40cm.
- Page 13 Notes...
- Page 15 Join Us Follow us on Facebook TuttiBambiniUK Follow us on Twitter TuttiBambiniUK Follow us on Instagram TuttiBambiniUK...
- Page 16 www.tuttibambini .com...
Need help?
Do you have a question about the Roma mini and is the answer not in the manual?
Questions and answers