Preparations
1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping or stickers .
2) Clean all components as described in the sec
tion "Cleaning and care" . Ensure that all parts
are completely dry .
3) Place the appliance on a clean and level
surface and attach it firmly in place with the 5
suction cups .
4) Insert the power plug into the socket .
Speed settings
Level
Use
all
1 2
Kneading
hook 0
Beater w
Beater w
2 4
Kneading
hook 0
4 6
Beater w
6 8
Whisk q
P
Blender t
■
60
│ GB │ MT
suitable for . . .
Starting position for
all mixing and stirring
processes
Adding ingredients
Kneading and mixing
of firm dough or
firmer ingredients
Mixing thick cake
mixture
Mixing butter and
flour
Mixing yeast dough
Kneading yeast
dough
Kneading thick cake
mixture
Cake batter
Whisking butter with
sugar
Biscuit dough
Whipped cream
Egg white
Mayonnaise
Whisking butter until
fluffy
Mixing and chopping
soft or liquid ingre
dients
Crushing ice
Working with kneading hook,
whisk and beater
WARNING! RISK OF INJURY!
►
Never place your hands or fingers in the
mixing bowl 6 during operation! Danger
of injury due to rotating parts!
►
Do not change accessories unless the drive is
at a complete standstill! After being switched
off, the drive unit will continue to run for a
short time .
►
In cases of malfunction, switch the appliance
off and remove the plug from the wall socket
to prevent the appliance from being switched
back on unintentionally .
ATTENTION! PROPERTY DAMAGE!
►
When working with the kneading hook 0,
whisk q or beater w we recommend al
lowing the appliance to cool down after
10 minutes of operation .
NOTE
►
When you work with the kneading hook 0,
whisk q or beater w, you should use the
lid 9 of the appliance to prevent the unwanted
leaking of ingredients .
Please proceed as follows to prepare the appli
ance for operation with the kneading hook 0,
whisk q or beater w:
1) Press down the release lever 2 . The swivel
arm 1 moves upwards automatically . If neces
sary, move the swivel arm 1 to the highest
position .
2) Insert the mixing bowl 6 in such a way that
the locking tabs on the mixing bowl 6 grip
into the recesses in the base 5 . To do this, one
of the handles must be pointing in the direction
of the rotary switch 3 . Turn the mixing bowl 6
clockwise so that it is locked and firmly held in
place .
SKV 1200 A1