Table of Contents
Advertisement
Lenovo Motorola One Zoom
Level 2 – Service and Repair Manual
Display Removal Method A
1.
Use the 3 mm Allen Wrench to loosen the
screws holding the side rails on the Display
Fixture. Do not remove the rails.
2.
Use the 3 mm Allen Wrench to remove the two
center screws.
3.
Orient the Display Removal Insert MR-M2-001-
041 in relation to the Display Removal Fixture
as shown. Place the Insert in the Battery
Removal Fixture.
4.
Use an alignment pin to lock the Display
Removal Insert and the Display Removal
Fixture as shown.
PAGE 21
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
Advertisement
Table of Contents
