Assembly; Adjustment - BLUM SERVO-DRIVE uno Installation Instructions Manual

SERVO-DRIVE for AVENTOS
Distribution cable assembly and connecting node assembly
AVENTOS HF / HS / HL / HK
Drive unit adjustment
AVENTOS HF / HS / HL
Drive unit assembly
NOTE
✓ ✓
➢ Before SERVO-DRIVE for AVENTOS assembly, the lift mechanisms
must be set so that the front remains open in different positions�
➢ The telescopic arm and/or lever arms must be in the completely open
position for drive unit assembly�
➢ If required, install the opening angle stop only after drive unit assembly
and before the reference run�
1
4
3
AVENTOS HK
EN
2
5
6
9