Page 1
HUAWEI NE40E-M2 Series Universal Service Router Hardware Description Issue Date HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
The packet header obtaining feature may be used to collect or store some communication information about specific customers for transmission fault and error detection purposes. Huawei cannot offer services to collect or store this information unilaterally. Before enabling the function, ensure that it is performed within the boundaries permitted by applicable laws and regulations.
Name e Type Type signals. HUAWEI NE40E-M2 Series does not support the OTN mode or FEC function. If a colored optical module is used and does not support optical amplifier insertion, the board supports only point-to-point optical transmission. Technical Specifications...
Page 24
1 PPS signals. HUAWEI NE40E-M2 Series does not support the OTN mode or FEC function. If a colored optical module is used and does not support optical amplifier insertion, the board supports only point-to-point optical transmission. Technical Specifications...
Page 29
1 PPS signals. HUAWEI NE40E-M2 Series does not support the OTN mode or FEC function. If a colored optical module is used and does not support optical amplifier insertion, the board supports only point-to-point optical transmission. Technical Specifications...
Page 157
Only optical modules matching Huawei products can be used. These optical modules are strictly tested by Huawei. If non-matching optical modules are used, device requirements may fail to be met, and services may fail to run properly. To replace optical modules, see Parts Replacement-Replacing an Optical Module.
Page 286
Figure 8-21 AE 905S module (back view) An AE 905S module must be inserted into a GE optical interface of SFP type. The AE 905S module has a STAT indicator under the HUAWEI logo. Table 8-106 describes STAT indicator states.