Honda Valkyrie 2014 Owner's Manual page 96

Tire Puncture u Removing Wheels
11. Remove the wheel nuts and rear wheel.
Installation
1. Install the rear wheel and tighten the rear
wheel nuts in the order indicated in the
image. Go around, tightening the nuts,
two or three times in this order.
Torque: 80 lbf·ft (108 N·m, 11.0 kgf·m).
94
Rear wheel nuts
2. Loosen the rear bolts, and put the rear
fender A back into its original place, then
tighten the rear bolts slightly.
3. Install the front bolts.
4. Tighten the front and rear bolts.
5. Install the rear fender B.
6. Install the right and left grab rails.
7. Install the right and left side covers.
8. Install the front and rear seats.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.