Sony Picture MD MPS-V500 Operating Instructions Manual page 25

Deleting the orders
You can delete unneccessary orders to update the order list.
1
Display the ORDER screen, and select "DELETE"
to display the DELETE screen.
2
/
Press the keys to move the cursor (z) to
the line on which you want to delete.
To confirm the picture, press the ^ key. The picture
appears on the screen, showing the cropping condition if
you have cropped it when recording the order.
To delete the order for a specified picture: Set the
cursor to the line of the desired picture. (You cannot
delete the order with "*" in the P column.)
To delete all the printed orders: Select "P DELETE."
To erase all the recorded orders: Select "ALL
DETETE."
3
Press the EXEC/ROTATE key.
"DELETE?" appears.
4
Press the EXEC/ROTATE key again to delete.
When deleting finishes, "COMPLETE" appears, then the
display returns to the DELETE screen. Make sure that
the assigned orders have disappeared.
To cancel deleting
In step 4, press the CANCEL/MIRROR key instead of the
EXEC/ROTATE key. The display returns to the ORDER screen.
To cancel the DELETE screen
During the operation above, press the CANCEL/MIRROR key
once to return to the ORDER screen, or twice to return to the
picture display.
MPS-V500/V500P (U/C/CED/GA).3-856-662-11 (1).EN
Note
Do not disconnect the battery or
DC cord during recording. Doing
so may damage the data on the
MD.
Error message
If the battery is too weak to record,
"LOW BATT" appears. Replace it
with another battery or recharge it.
25
(EN)