Materials And Tools Required - Siemens SIMATIC Manual

Materials and Tools Required

Quantity
1 Rail
1 Power supply (PS)
1 Central processing unit (CPU)
1 Micro Memory Card (MMC)
Please note:
You must have an MMC in order to use certain CPUs
(see Applicability)
1 Digital input module (DI) with bus connector
1 Digital output module (DO) with bus connector
2 Multipin front connector with screw-type contacts
•
1 Programming device (PG) with MPI interface and
STEP 7 software version w 5.1 + SP 4 installed and
PG cable or
•
PC with suitable interface card
Various M6 screws and nuts (length depends on installation
location) with suitable screwdriver / wrench
1 Screwdriver with 3.5 mmblade
1 Screwdriver with 4.5 mmblade
1 Side cutter and cable stripper
1 Crimp tool
X m Cable with 10 mm
and suitable cable lug for M6 screw. Length of cable
depends on local requirements.
Approx. Flexible cable with 1 mm
2 m ferrules with insulated collar, length 6 mm
X m 3-core flexible power cable (AC 230/120 V) with
shock-proof plug; length dependant on local
requirements, with suitable
ferrules and insulating collar.
2 Single–pole ON switch (24 V)
4
Item
2
cross-section for grounding the rail
2
cross-section and suitable
Order number (Siemens)
e.g. 6ES7 390-1AE80-0AA0
e.g. 6ES7 307-1EA00-0AA0
e.g. 6ES7 312-1AD10-0AB0
e.g. 6ES7 953-8LL00-0AA0
e.g. 6ES7 321-1BH02-0AA0
e.g. 6ES7 322-1BH01-0AA0
e.g. 6ES7 392-1AM00-0AA0
Depends on configuration
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
S7-300 Automation System CPU 31x: Commissioning
A5E00164278-02