Step 5: Configuring The Hardware - Siemens SIMATIC Manual

Stage
9 Close the editor and confirm that you want to save with
Yes.

Step 5: Configuring the Hardware

Stage
1 In SIMATIC Manager, click SIMATIC 300 Sta-
tion in the left-hand part of the window.
2 Double-click the Hardware button in the right-
hand part of the window.
S
3 If a catalog is not displayed in the right-hand
part of the window, activate the catalog by
choosing the Catalog command from the
View menu.
S
Navigate to DI-300 via SIMATIC 300 and
SM-300.
S
Insert the CPU 313C with drag-and-drop to
slot 2 (the upper or lower left-hand window).
Note:
You can find out the order number if you click a
DI in the catalog. The order number of this DI
then appears in the text box under the catalog.
4 Check that the order number displayed for slot
2 in the lower left-hand part of the window cor-
responds to the order number on your CPU.
If necessary, widen the order number column to
display the whole order number
5 Insert the SM 322 DO16xDC24V/0.5A whose
order number corresponds to the order number
on your DO by dragging and dropping it on
slot 5.
6 From the Station menu, choose the Save and
Compile command.
7 Close the editor.
Automation System S7-300, Getting Started – CPU31xC:Commissioning:
A5E00105538-02
What to Do
Procedure
Result
The editor closes, and the OB1 is sa-
ved.
Result
The buttons Hardware and CPU 313 C ap-
pear in the right-hand part of the window.
The hardware configuration editor opens.
If yes: Continue from stage 5.
If no: Navigate in the catalog via CPU 300
to CPU 313C and replace the CPU on slot 2
with the CPU with the correct order number
from the catalog by dragging and dropping it.
The hardware configuration is compiled and
saved.
The editor is closed.
Cata
7