Chapter 1 Replacing the Front Bezel Single Phase UPS Unit
10. Hold the red plug with two fngers and carefully unplug it from the LCD circuit board.
Repeat for second plug
11. Feed the ribbon cable assembly back through the round LCD hole in the bezel. Set the
used bezel and LCD assembly aside. They are no longer needed
Assembling the LCD Display Bezel
1.
Grab the new LCD bezel assembly and turn it up-side down
2.
Use a fat blade screwdriver to unlatch the display from the frame on one side, the other
side should unlatch at the same time. Push the LCD display through the bezel so that it
is in front of the bezel
Replacing the UPS Front Bezel including LCD
7