Table of Contents
Advertisement
System Setup
Footswitch Installation (continued)
Configuring Footswitch
3-46
Footswitch supports these configurations: No Function, Rec/
Pause, Freeze, Next Heartcycle, Prev Heartcycle, Print 1, Print
2, Print 3, Print 4, Update, Next Step (Scan Assistant), Previous
Step (Scan Assistant), Scan Assistant Pause/Resume or Mark
Cine. The default setting is No Function.
Enter Utility -> Application -> Settings to configure the
Footswitch functions.
Figure 3-25. Configuring Footswitch Functions
LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the LOGIQ e and is the answer not in the manual?
Questions and answers
Need to do backup to remove ultrasound results off LOGIQ e system
To back up ultrasound results from the GE LOGIQ e system:
1. Insert a backup storage device (DVD-R disk, USB memory device, or SD Card).
2. Navigate to Utility -> System -> Backup/Restore.
3. Select the item to back up.
4. Enter or browse to the backup destination.
5. Select Backup.
6. The backup status for each item will be displayed in the Result column.
This answer is automatically generated