8BITDO P30 Instruction Manual

PC Engine Mini，PC Engine CoreGrafx Mini & TurboGrafx 16 Mini
1. Plug the receiver to your chosen device, blue LED blinks once per cycle.
2. Press HOME button on the controller to pair.
Blue LEDs on both the controller and receiver become solid when connection is successful.
3 .
Switch
1. Plug the receiver to your Switch, blue LED blinks 4 times per cycle.
2. Press HOME button on the controller to pair.
3. Blue LEDs on both the controller and receiver become solid when connection is successful.
* Switch system needs to be 3.0.0 or above. Go to System Setting > Controller and Sensors > turn on Pro
Controller Wired Communication
Battery
Status
Low battery mode
Battery charging
Battery charged
·Built-in 180 mAh Li-on with 18 hours of play time.
·Rechargeable via USB cable with 1 – 2 hour charging time.
·Controller turns off in 1 minute with no connection and 15 minutes with connection but no
use
Retrieve a lost connection or connect to a new receiver
1. Turn on the controller then press and hold SELECT button for 3 seconds. Blue LED starts
to rapidly blink.
8BitDo P30 2.4G Wireless Gamepad
Instruction Manual
LED Indicator
Red LED blinks
Red LED stays solid
LED turns off